In the engine departement you have a round terminal.
First you turn the ignition key to the second position that means you turn to contact but you dont run the engine. Then you conect in the round terminal with a wire the pin 7 and pin 19 for 12 seconds. Than you turn the ignition key back for 20 seconds. After 20 seconds you do the first step again.
The times that i gave you must be followed in exact steps otherwise the reset wont work.

So....... key on contact, wire the pin 7 and 19 for 12 seconds.
Wait for 20 seconds
           key on contact, wire the pin 7 and 19 for 12 seconds

the work is completed. The 5 green lights are glowing again